Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
Jim, all the specs I have seen call for about 1* positive camber. Looks like your front end is slightly negative on one side when no shims are installed. There is nothing the shop can do as adding shims will make it more negative. All they can do is remove shims from the other side to even things out as best they can. My car has the same problem.
Drive it.
Bill
Jim, what kind of A-frame pivot bushings are you using? If using the original type, with metalistic bonded rubber, you do not tighten them until the car weight is fully on the axles.