Jimjordan2
Donation Time
I'm starting a new rebuild on an engine for the Sunbeam. I'm bound and determined to build one of these that won't stake it's claim on my driveway. Yes, I could pull the engine that's running right now, but then going at my pace, it may be many months before I have a driving car again. This way when I'm ready, I'll just swap them out in one day. Can't miss Cars and Coffee in So. California. Even though it's winter, yeah, we still drive em'.
Anyway, the head that I have
is one of the solid heads, meaning the sparkplug holes are cast in the head instead of the tubes. The question is; All my previous heads have had dual springs on the valves and this one has only one spring on the valves. Actually a different design spring? or will this be a problem, and do I/should I have double springs?
Anyway, the head that I have
is one of the solid heads, meaning the sparkplug holes are cast in the head instead of the tubes. The question is; All my previous heads have had dual springs on the valves and this one has only one spring on the valves. Actually a different design spring? or will this be a problem, and do I/should I have double springs?