heat shield
David use any material that will hold up under the conditions you drive in. Alum Is O.k. for the shield as to motor mount shims. steel would be better.. I used steel fender washers and or shims that were slotted , and just backed out the bolts and slid them in place,so I would not have to line up the mounts., hold in the shims, and start a bolt at the same time. Good luck Earl bluoval
David use any material that will hold up under the conditions you drive in. Alum Is O.k. for the shield as to motor mount shims. steel would be better.. I used steel fender washers and or shims that were slotted , and just backed out the bolts and slid them in place,so I would not have to line up the mounts., hold in the shims, and start a bolt at the same time. Good luck Earl bluoval