1. Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

    Dismiss Notice

What distributor with 2.8 V6

Discussion in 'Modified Alpine' started by mr.vman, Aug 15, 2020.

  1. mr.vman

    mr.vman Donation Time

    Need a distributor for the V6 conversion. Engine came with breaker points. Electronic ignition would be nice to have. Noticed that the, 1975 and 1976 distributors use the small cap single vacuum (Ec-1? electronic control first generation). 1977 (Ec-2) and later has the two piece cap. Choice of single vacuum (no retard) or dual vacuum. What is the prefered distributor? I know no vacuum retard, single vacuum. Limited as to what is available, as will have to buy rebuilt. Do not have a core. Converting the breaker points to Pertronix is the last choice. So what distributor to buy? Looks like Oriely Auto Parts has them. Rock Auto is on rebuilt basis. Any other sources that have distributors? Suggestions? Thanks, project is moving along.
    Steve V. Arizona
     
  2. 260Alpine

    260Alpine Silver Level Sponsor

    Steve, also check Ebay. I think all Mustang II were single diaphram. 77-78 is the one you want.
     
  3. NorCal

    NorCal Silver Level Sponsor

    I recently solved that problem too. Here is the thread
     

Share This Page