DanR
Diamond Level Sponsor
What could be the problem?
The clutch linkage from pedal to release bearing is connected.
The Hyd Slave Cyl has been adjusted for the correct throw, it has been bled, and tested out of the car for the release of the clutch disc.
By this I mean, the engine will freely turn and the transmission gears are in neutral. But when installed in the car, the clutch does not release.
Seems as if the Slave does not have power to pull the lever.
The clutch linkage from pedal to release bearing is connected.
The Hyd Slave Cyl has been adjusted for the correct throw, it has been bled, and tested out of the car for the release of the clutch disc.
By this I mean, the engine will freely turn and the transmission gears are in neutral. But when installed in the car, the clutch does not release.
Seems as if the Slave does not have power to pull the lever.
Last edited: