DanR
Diamond Level Sponsor
Guys, I am in need of a replacement lug bolt for a project I am doing to one of my Alpines. The stock lug bolt is a 7/16-20 and I measure 1 5/8" in length.
The bolt I need as a replacement should be 2 1/2" in length ( I may get by with 2 1/4" but prefer 2 5/8").
What brought this about was while doing a Rear disc conversion and utilizing a different wheel, the spacing between the hub and the wheel had to be increased by 1/2", so I used a spacer that provided that spacing. But in so doing I do not have suffient threads to be safe mounting the wheel.
Any suggestions, recommendations, comments are surely welcome.
The bolt I need as a replacement should be 2 1/2" in length ( I may get by with 2 1/4" but prefer 2 5/8").
What brought this about was while doing a Rear disc conversion and utilizing a different wheel, the spacing between the hub and the wheel had to be increased by 1/2", so I used a spacer that provided that spacing. But in so doing I do not have suffient threads to be safe mounting the wheel.
Any suggestions, recommendations, comments are surely welcome.