Here is shot of my new oil pan. The concave portion on the left is to crossover the exhaust pipe.
This is how it looks installed with the exhaust pipe.
I am concerned about the clearance as the pipe runs under the pan. At the top of the pipe, there is about 1" clearance. At the front, there is 3/4" between the pipe and pan. Is this sufficient, if not, how much clearance should I have?
By the way, this pan is almost 3" shorter than the stock Ranger pan. Will give over 6" of ground clearance!
Bill
This is how it looks installed with the exhaust pipe.
I am concerned about the clearance as the pipe runs under the pan. At the top of the pipe, there is about 1" clearance. At the front, there is 3/4" between the pipe and pan. Is this sufficient, if not, how much clearance should I have?
By the way, this pan is almost 3" shorter than the stock Ranger pan. Will give over 6" of ground clearance!
Bill