bohemianway
Donation Time
I need to finally get the Alpine back on the road after 10 years of storage. At that time I needed to do:
1) replace T-fitting between Strombergs
2) replace clutch slave cylinder
3) clean paint/coat inside of fuel tanks
4) rear axle hub/bearing seals
Any help on where to get the parts, watch out fors, and advice appreciated.
Thank you,
Charles
1) replace T-fitting between Strombergs
2) replace clutch slave cylinder
3) clean paint/coat inside of fuel tanks
4) rear axle hub/bearing seals
Any help on where to get the parts, watch out fors, and advice appreciated.
Thank you,
Charles