Positraktion
Gold Level Sponsor
I have a 2.8l V6 with a 4-speed.
Last week the shift stick broke about an inch or so above the fork.
Had to take shift linkages off to remove the shifter, and had it repaired.
But now after reassembling, for some reason, the shifting is very hard, only drove it a few hundred yards.
(FYI - I did tag the rods and shifter arms so they are in correct position.)
Does anyone have a 4-speed, and if so, maybe has pictures of the shift linkages connected up.
Sure would appreciate them.
Thanks in advance
Positraktion
Last week the shift stick broke about an inch or so above the fork.
Had to take shift linkages off to remove the shifter, and had it repaired.
But now after reassembling, for some reason, the shifting is very hard, only drove it a few hundred yards.
(FYI - I did tag the rods and shifter arms so they are in correct position.)
Does anyone have a 4-speed, and if so, maybe has pictures of the shift linkages connected up.
Sure would appreciate them.
Thanks in advance
Positraktion