johnrbayer
Donation Time
All: Just bought 67 Series V. Seemed really down on power. I set static timing to TDC at 6 deg BTDC.
When I put the light on it, the closest I could get was about 20 deg before...and then the vacuum advance hit the block as I tried to turn it further ccw to get the timing where it belongs.
I don't know if the previous owner marked the distributor cap wrong or put it in a few teeth off.
Can I move all the plug wires around on the cap to get the adjustment room I need or is the distributor off a few teeth?
Number one on the distributor cap currently points at about 7 o'clock as viewed from the distributor side, with 12 o'clock being the center of the valve cover...help!
When I put the light on it, the closest I could get was about 20 deg before...and then the vacuum advance hit the block as I tried to turn it further ccw to get the timing where it belongs.
I don't know if the previous owner marked the distributor cap wrong or put it in a few teeth off.
Can I move all the plug wires around on the cap to get the adjustment room I need or is the distributor off a few teeth?
Number one on the distributor cap currently points at about 7 o'clock as viewed from the distributor side, with 12 o'clock being the center of the valve cover...help!