hopsedge
Platinum Level Sponsor
1967 SV. I am removing the dashboard to access all the gauge wiring. I am referring only to the vertical face of the dash that holds all the gauges, switches, etc.; not the horizontal top padded part that abuts the bottom of the windshield.
All bolts are removed, top & bottom covers of the steering column are removed, and there is slack in the main harness. I've disconnect everything off the main harness that could keep the dasj from pulling free a few inches. But I cannot get this bugger to come out!
Do I have to remove the glove box? It seems that I do, b/c I cannot tilt the dash enough to clear the top pad before the bottom left "ear" of the dash binds against the left side of the steering column. I am afraid if I torque/spin the dash any more, I'm going to mess it up, or rip the glove box off. There are two pins on the left side of the glove box that seem to hold the glove box to the dash. The top one has already pulled free, but the bottom one is holding firm. I don't think they are bolts with nuts, but I have not so far been able to pop it loose.
Please help!
All bolts are removed, top & bottom covers of the steering column are removed, and there is slack in the main harness. I've disconnect everything off the main harness that could keep the dasj from pulling free a few inches. But I cannot get this bugger to come out!
Do I have to remove the glove box? It seems that I do, b/c I cannot tilt the dash enough to clear the top pad before the bottom left "ear" of the dash binds against the left side of the steering column. I am afraid if I torque/spin the dash any more, I'm going to mess it up, or rip the glove box off. There are two pins on the left side of the glove box that seem to hold the glove box to the dash. The top one has already pulled free, but the bottom one is holding firm. I don't think they are bolts with nuts, but I have not so far been able to pop it loose.
Please help!