AlpineWrench
Donation Time
Hey I did some more work lately and had some more questions. First off I went down to the Sports Car Craftsmen shop in Denver and bought new brake pads for the rear hoping to fix the emergency brake problem I was having. When I took out the pads I realized they weren't like the old ones and ended up cutting them down and drilling holes to make them fit. While putting the new pads in we turned the tappit all the way in to get the brakes to fit. Supposedly the repeated should automatically adjust the adjustment wheel. Since we turned in the tappit it hasn't re-adjusted itself. Should we go back into the wheel and readjust it ourselves?
On another note I tried to put the emblems on the car and realize there wasn't any way to get behind the fender to the back of the holes... is there a trick to putting them on?
AlpineWrench
P.S. Im not sure if I used all the correct terminology let me know if you have any questions
On another note I tried to put the emblems on the car and realize there wasn't any way to get behind the fender to the back of the holes... is there a trick to putting them on?
AlpineWrench
P.S. Im not sure if I used all the correct terminology let me know if you have any questions