greencarmark
Silver Level Sponsor
-
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
Girling Mk2a Servo 5”
- Thread starter greencarmark
- Start date
Pete S.
Bronze Level Sponsor
From the Girling service guide,
“In the end cover of the Powerstop is fitted a piston return stop, which determines the gap between the output piston and the piston rod when fully returned. The gap governs the flow of fluid through the unit when at rest and the smoothness of the application of power."
"The position of the stop is set and locked during final test and should not be disturbed in service.”
Best wishes.
“In the end cover of the Powerstop is fitted a piston return stop, which determines the gap between the output piston and the piston rod when fully returned. The gap governs the flow of fluid through the unit when at rest and the smoothness of the application of power."
"The position of the stop is set and locked during final test and should not be disturbed in service.”
Best wishes.
greencarmark
Silver Level Sponsor
Thanks much!
Pete S.
Bronze Level Sponsor
You're are welcome. I neglected to include the next paragraph --> "A design modification renders unnecessary the external piston stop and units being manufactured at the present time do not incorporate this feature."
Adds a bit of clarity.