Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
Have you hooked up the throttle cable yet? I'm sort of stuck on that. I drew up something really complicated that sort of looks like the 1725 linkage that will pull a shortened miata cable, but I'm sure there is an easier and probably more elegant solution.
I also installed my oil filter remote mount tonight. Where did you mount the filter? I went with a 3/4" thread mount so I can run a stock alpine filter rather than the shot glass sized miata filter. It's also the same filter as the rest of my vehicles so i usually have one in hand
What radiator are you using? is it custom?
Thank you for posting all the up-dates and pictures. I plan on doing this to my Ser II, I now have a Datsun A14 motor with 4 speed that I installed back in 1979 I picked up a 1992 1.6 with 5 speed, so far I have started removing the wires I don't need from the harness. I can't tell from the pictures if the in-take support clears the Sunbeam, it looks like in your pictures the mount on the in-take has been removed? I was thinking about removing the in-take mount and building one off the throttle mount.