• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

straight back headers by danr

  1. DanR

    From start to Finish - Straight back Headers - almost 6 years

    This was started as a POST to Jim and Bob on another section of our FORUM. Not being to the subject it is moved to here: You Guys (Jim our PRESIDENT & Bob 65beam) are fast! Over a three year period, three different shops had my '65 SIV GT more than six months each while supposedly building my...
  2. 2.8 V6 Mustang II Head Exhaust Modification ( 20170217_130507) by DanR

    2.8 V6 Mustang II Head Exhaust Modification ( 20170217_130507) by DanR

    Emission holes under the exhaust ports; drill & tap 10 mm 1.5 threads matching stock bolts; A means of ensuring against exhaust leakage. Prior thought (Jose) was to "not tighten the top bolts because they would separate bottom causing exhaust leakage, now no problem with this modification:)
  3. Components for Converting FORD Cologne 2.8 V6 in Alpines

    Components for Converting FORD Cologne 2.8 V6 in Alpines

    Straight back headers (on the right) designed by DanR showing a comparison to currently available that stick out the side. The Straight back ones are very similar to the Tiger system, running along side the transmission. They do not hang down below the frame which helps over speed bumps and such..
Back
Top