• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

modified alpine

  1. DanR

    V6 Conversion - Mutt II Bellhousing - Ranger/Bronco II

    If you are aware of some items such as the bellhousings (BH) needed for converting an Alpine 4cyl to the FORD 2.8 V6 (Cologne) Engine, you may know there is often times where the BH is difficult to obtain. While it has been the mainstay in the Conversion, I have now "fixed" that problem with an...
  2. DanR

    Flywheels/Pressure Plates/Clutch Disc

    Guys I have tried to figure a way to keep some of the difficult parts for the V6 available since I began dealing with the Conversion for the Alpine. A company in the USA has agreed to be creative and build some of the components we need, namely the items in the "Subject By-Line" above. The...
  3. DanR

    Alpine with 302 automatic

    This POST is for Fonz and his re-creation of a very rusty normally considered beyond restoring Alpine that He has taken on as a Project ALGER. Admiration is give to Him and anyone that would even start such a Project. SAOCA Motto: Keep'em-on-the-Road is at work:)
  4. DanR

    Rear Disc Brakes for a Sunbeam Alpine! Tiger?

    I've read what I could find on rear disc for a Sunbeam Alpine/Tiger. Lots of suggestions! It appears most are for a modified rear axle not a stock as coming on your Sunbeam. On this site you will find there are lots of great ideas put forth for assisting with about anything you can imagine...
Back
Top