• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Search results

  1. C

    Need to clear out some SII & SIV junk

    This is from the ‘62. The handle is bent. I don’t know if it is supposed to be.
  2. C

    Need to clear out some SII & SIV junk

    It turns but it is a little stiff. If I was going to use it I would rebuild it. It came out of the ‘62 so it doesn’t have the telescoping column.
  3. C

    Need to clear out some SII & SIV junk

    I need to make some room in my garage. I have the remnants of a ‘62 SII and series IV parts cars that I want to clear out. Items include 2 transmissions, flywheels, and bell housings. Both would require a rebuild. The ‘62 had a Rapier engine in it, the IV had a 1725 motor. The Rapier motor was...
  4. C

    Very Personalized 1967 EBAY Alpine

    Wow. A Sunbeam that I'd be embarrassed to drive. Who knew?
  5. C

    Parts Hoarder Wanted

    I'm looking for someone to take the remainder of my spares off my hands. I'm located in south central PA. I need to get rid of all the excess stuff I have in my garage. Years ago I bought a '62 SII and '64 SIV for parts. This is what I have left; front end clip from the SII, 2 hoods,2 trunk...
  6. C

    Wire Wheels

    Hi, I have a set of four but they would need some work to be made road worthy.
  7. C

    Series II,IV,V Parts

    Are you looking for the external or the internal spring mechanisms? I have three chrome pieces. One is very pitted. The other two are decent. One is still on the trunk. The one that is off has good threads. I don't have any lifting hinges or springs from inside the trunk. I can send you some...
  8. C

    Series II,IV,V Parts

    Hi Colin, Sorry,I had the whole front suspension from the series II stored in my parent's barn and my dad decided to clean up some "junk"...
  9. C

    Series II,IV,V Parts

    I have a center cap that is in nice shape however the center insert has two cracks in the Vinyl part and the little clear center piece is crazed. The chrome is good. PM me and I can send you some pictures.
  10. C

    Cubby Box Trim

    I have a series II piece. It has the fourth pin and no cutout for the maplight. But it's in one piece.
  11. C

    Series II,IV,V Parts

    I had to move my spares into my garage recently and I need to get rid of all this stuff I'm never going to use. I have a SII front end clip minus the valance. It's straight and rusted out at the rear of the wheel arches. It goes back to the door but the scuttle is cut out. I have three round...
  12. C

    1 right sided 3 wing Knock off...

    Hi Rob, I have three knockoffs from a 62 parts car. I found one right side (reverse threads) it has some hammer marks but is in pretty good condition. The chrome looks good but has a few chips on the tips of the ears. I can send you some pics if your interested. Xb, Chris
  13. C

    series 4 intake manifold

    Hi, are you still looking for an intake? I have one off a series IV parts car that had a 1725 motor in it but it had the dual zenith carbs. Let me know if you can use it. I have a bunch of parts that I need to get out of my garage. I'm located in York, PA. Regards, Chris Keller...
Top