DaveSeries1
Silver Level Sponsor
Here's one for the pros. My S1 has been running well during the break in period, most everything is ok. One big problem. My overdrive keeps blowing the fuse when I try to engage it. Power to the solenoid is good, with the Green/Black wire disconnected, it lights a test light. Took the solenoid out, cleaned everything, put it back in and tested it. Tried 6 times and it clicked and worked every time. Pump lever is not stuck and moved freely. Took it down the road, Engaged the overdrive, and it blew the fuse! Replace the fuse, tested the circuit again in the driveway, all is good. What the heck is happening? I'll road test it tonight and see if it blows another fuse but I'm stumped. Another small problem, the low beam filament of the driver's side headlight keeps blowing out. Voltmeter shows 13 1/2 volts, no overload, but 3 bulbs have blown. Any ideas?