Out of curiosity

[Jeb Stuart]

What series is this manifold from?

http://cgi.ebay.com/ebaymotors/Sunb...ryZ36474QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[RootesRacer]

What series is this manifold from?

http://cgi.ebay.com/ebaymotors/Sunb...ryZ36474QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Twin Stromberg CD150, from a series V.

 

[alpine_64]

Jarrid,

You going by the part numbers? If not it might also be from an alpine GT.,. which would mean its no good for a Setries alpine and it will be set at a 10deg angle. So just make sure

 

[64beam]

Hi,

Looking at the Ebay auction, the manifold looks like it is OK. The angle of the manifold that is. As Michael suggested, ask the question though.

Regards, Robin.

 

[RootesRacer]

Jarrid,

You going by the part numbers? If not it might also be from an alpine GT.,. which would mean its no good for a Setries alpine and it will be set at a 10deg angle. So just make sure

Ive seen some of those, and at least the ones you might find in the states (they are rather rare here), the intake looks different as compared to the series alpine strom intake.

 

[65beam]

intake

this intake is not for the fast back alpines . they have a different mounting and are different on the bottom of the intake . they bolt to the exhaust manifold by way of four bolts ,two at each carb. the intake shown is for a series 5 .

 

[Jim E]

Dime a dozen, I would have listed the PCV valve and tossed the intake.