-
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
Crankshaft nut
- Thread starter lupster04
- Start date
puff4
Platinum Level Sponsor
It's homemade, I believe. However, the crank nut can be removed with a Proto Tools 1-5/16" deep socket, #J5342H. It's the only one I found that has the depth to accept the long crank nut. See:
https://www.amazon.com/Stanley-Proto-J5342H-Point-Socket/dp/B000UTJ0WA
That being said, another member here says that he's used this one successfully, too:
https://www.amazon.com/gp/product/B0756QBS2
https://www.amazon.com/Stanley-Proto-J5342H-Point-Socket/dp/B000UTJ0WA
That being said, another member here says that he's used this one successfully, too:
https://www.amazon.com/gp/product/B0756QBS2
Last edited:
I have used the Tekton deep impact 1-5/16" socket from a set of sockets and it has enough depth for the series V crankshaft nut. Unfortunately, the set appears to be not available currently from Amazon or Home Depot. Maybe the set has been discontinued.
https://www.amazon.com/gp/product/B000NPT6DE
Mike
https://www.amazon.com/gp/product/B000NPT6DE
Mike
1 5/16" is equivalent to 34mm, which is readily available as an axle spindle socket. Autozone and Advance Auto will loan you one for free. https://www.autozone.com/loan-a-too...oint-chrome-axle-spindle-nut-socket/69345_0_0
