• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Camshaft Identification

mxp01

mxp01

Platinum Level Sponsor
I need some assistance identifying the camshaft I pulled out of my 1725. I was not able to find anything online with what markings are on the cam. I’m was told that it is aftermarket by the previous owner.

The cam is marked
Integral 110
274x305
 

Attachments

  • A6F492B9-3678-4086-B7D9-54F27A5C85A8.jpeg
    A6F492B9-3678-4086-B7D9-54F27A5C85A8.jpeg
    829.1 KB · Views: 31
bernd_st

bernd_st

Bronze Level Sponsor
Definitely an aftermarket or modified/reground cam. Would read it as 274° overlap with 0.305" lift...
 
Last edited:
Barry

Barry

Diamond Level Sponsor
bernd_st said:
Definitely an aftermarket or modified/reground cam. Would read it as 274° overlap with 0.305" lift...
Click to expand...


Perhaps 274 degrees of duration, but certainly not 274 degrees of overlap.

My SWAG would be 274 degrees of intake duration and 305 degrees of exhaust duration AT TAPPET LIFT which would be something like 224 and 255 degrees intake / exhaust duration at 0.050". "110" would be a typical value for lobe centerline.
 
You must log in or register to reply here.
Top