George Coleman
Gold Level Sponsor
I have a limited number of hardened axle shaft keys for the ones that need them on the V6 conversions.
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
George, I have a Sv with wire wheels I have to replace my rr hub and tear down the rear axle for oil seals will your hardened keys fit an alpine?I have a limited number of hardened axle shaft keys for the ones that need them on the V6 conversions.
As far as I know the keys will work on wire wheels. I had these made for people that are using the V6 and still have a stock Alpine rear end. The stock keys should be ok for your application, should not be an issue as for the ones you have o would not replace them.George, I have a Sv with wire wheels I have to replace my rr hub and tear down the rear axle for oil seals will your hardened keys fit an alpine?
Dan I did not get an email from you?I'll take two sets. I sent you an E-mail...
Thanks for the adviceAs far as I know the keys will work on wire wheels. I had these made for people that are using the V6 and still have a stock Alpine rear end. The stock keys should be ok for your application, should not be an issue as for the ones you have o would not replace them.
George, I was sure that I sent you an E-mail.... I need to check again .Dan I did not get an email from you?
OK, George I'll send a check. 2 sets! How much?send me the address again, 2 sets right? send a check
George Coleman
840 South Spring St.
Burlington, NC 27215