• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

window assembly

bkasl

bkasl

Donation Time
Okay, after struggling now for the past several hours, and not seeing too much guidance for the manual, what is the procedure to reinstall a complete window assembly for both sides?
I have the front and rear tracks in, but the assembly itself is like a spiders web, and when is the glass installed into the track? Brent
 
B

Bill Blue

Platinum Level Sponsor
Brent, remove the front channel. Insert the glass from the front of the of the car. The glass has to be sharply angled down at the rear. Have the mechanism rolled about 3/4 of the way up. Insert the front roller, slide the window rearward, then insert the rear roller, then slide the glass back into the rear channel and install the front channel.

The glass will not insert from the rear. I know some do not remove the front the channel, but I had to and it was pretty simple using this method.

Bill
 
You must log in or register to reply here.
Top