Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
Love your interior.This is how I mounted mine, I ran the bolt into the wheel well. Both sides are the same.
I had that problem you speak of (ADAPTOR) I just shoved the hole column forward. mad the notch wider as I don't use the lower bolster!Before I do anything else, I will mount the wheel and check the fit, but I think I will need to make some changes to move things forward.
I have already routed out the fire wall enough to get the column shaft through. I dont want to go so far forward that I bind up the u joints. I will let you know how it goes. Does anyone know, can I cut off any of the DD shaft without compromising anything?I had that problem you speak of (ADAPTOR) I just shoved the hole column forward. mad the notch wider as I don't use the lower bolster!