Interesting. Good to know that it is possible, but based on your write-up, it still didn't do the trick. Right? Do you think it is a worthwhile starting point, or next time will you just go straight to the vinegar?
Based on feedback, I didn't let the electrolysis process run long enough. But I'm not hearing multiple folks confirm that electrolysis will remove paint. I'd want to do a paint removal test on some old part first.
I know vinegar will weaken the paint / paint to metal bond given time. If I ever do tanks again myself, I'd go straight to the vinegar, after starting with a de-greaser, such as Simple Green, or the POR-15 Cleaner Degreaser. I'd soak for the tank in vinegar for at least a week. If more soaking time is needed, just pour the vinegar back in and let it soak longer.
One of the nice things about using vinegar is that you can reuse it. I still have about 5 gallons of vinegar left from my fuel tanks project that I am slowly working through.
In my write-up, I mentioned I'd use the paint remover again. I'd probably try vinegar first and fall back to using the paint remover if vinegar didn't get the job done (after using the vinegar for at least a couple of weeks). The paint remover is pretty nasty stuff and I'd want to avoid using it if possible.
Last edited: