I have been reading and messing around with my fuel gauge and can't solve it.
It reads full at all times. The needle is buried on the right. I have pulled the sending unit and cleaned it and checked the resistance between the spade terminal and the body. It reads about 250 at empty and about 20 at full.
When I put 12 dc volts across to the body it reads 12 volts at the spade terminal at full and at empty.
I have put the fuel sending unit lead to the temperature gauge (as a test gauge) and it goes all the way to the right as well.
I have ready many of the threads on this site and can't find a solution.
Any help would be appreciated!
It reads full at all times. The needle is buried on the right. I have pulled the sending unit and cleaned it and checked the resistance between the spade terminal and the body. It reads about 250 at empty and about 20 at full.
When I put 12 dc volts across to the body it reads 12 volts at the spade terminal at full and at empty.
I have put the fuel sending unit lead to the temperature gauge (as a test gauge) and it goes all the way to the right as well.
I have ready many of the threads on this site and can't find a solution.
Any help would be appreciated!