• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Emmissions Valve

6

66Beam

Donation Time
Trying to locate what I believe to be a crankcase emissions valve, it is a module that is attached to the oil filler neck and is then routed to the carbs.

Any help would be appreciated.
 
M

mikephillips

Donation Time
The one on the filler neck is a flame trap to prevent backfires from reaching the valve area. Doesn't really serve an emmisions function in itself.
 
T

Tom H

Platinum Level Sponsor
As Mike noted that large item at the filler neck is a flame trap, filled with mesh, but is not a valve. Note that there IS a PCV valve that screws into the top of the head on the carb side. Then a hose goes from there to the pipe on the side tappet cover. So please confirm that it is the flame trap that you need.

Tom
 
R

RootesRacer

Donation Time
Tom H said:
Note that there IS a PCV valve that screws into the top of the head on the carb side. Then a hose goes from there to the pipe on the side tappet cover. So please confirm that it is the flame trap that you need.

Tom
Click to expand...

It screws into the inlet manifold.

The thing that screws into the head is cooling hose.
 
You must log in or register to reply here.
Top