George Coleman
Gold Level Sponsor
What is the OD size of the stock clock? 60mm or 50 mm?? Thanks
-
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
Clocks
- Thread starter George Coleman
- Start date
alpine1963
Diamond Level Sponsor
Hey George,
The hole for the clock is 58mm with a large area up to 64mm grooved out on the back of the dash. This allows the filler plate to have the tabs folded if you do not have a clock. If you are looking into an aftermarket clock, anything over 58 mm will be too large.
Cheers,
The hole for the clock is 58mm with a large area up to 64mm grooved out on the back of the dash. This allows the filler plate to have the tabs folded if you do not have a clock. If you are looking into an aftermarket clock, anything over 58 mm will be too large.
Cheers,