-
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
5 Speed transmission for V6
- Thread starter EdSua
- Start date
MikeH
Diamond Level Sponsor
From what I've been able to find out the TR-3650 is what replaced the T-45 on the 4.6 V8 Mustangs. I believe the bell housing on the 3650 is an integral part of the trnasmission, so it could not mount on a Mustang II bellhousing.
Here's a link that describes it. The attached photo shows the bolt pattern inside the bell housing.
http://www.ttcautomotive.com/English/products/TR-3650.asp#Car
Here's a link that describes it. The attached photo shows the bolt pattern inside the bell housing.
http://www.ttcautomotive.com/English/products/TR-3650.asp#Car
Hi Ed,
Any transmission from a Mustang V8 that is 1994 or later, will not work, because the bellhousing is part of the transmission, and the bellhousing will not fit the V6. Any pre 1994 T5 will fit, but I recommend the 1996 and later T5 from behind the 3.8 V6 Mustang. They can be purchased for a reasonable price and will have less mileage and abuse than the earlier V8 T5's.
Jose
Any transmission from a Mustang V8 that is 1994 or later, will not work, because the bellhousing is part of the transmission, and the bellhousing will not fit the V6. Any pre 1994 T5 will fit, but I recommend the 1996 and later T5 from behind the 3.8 V6 Mustang. They can be purchased for a reasonable price and will have less mileage and abuse than the earlier V8 T5's.
Jose