• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Sunbeam Alpine Road Race Drivers 1966-1968

Michael and Eric correct me if I'm in error, but I thought 3:89's were equipped w/Od's ?

... David
The 3.89 was the standard ratio for all non-OD Alpines SI-V except for a period of USA spec SV that put the 4.22 in to help acceleration.

The 4.22 was fitted to all OD alpines except series 3 which had the 3.89 in both OD and non OD cars... hence their good cruising ability.... and rare speedo gauge!
 
The 3.89 was the standard ratio for all non-OD Alpines SI-V except for a period of USA spec SV that put the 4.22 in to help acceleration.

The 4.22 was fitted to all OD alpines except series 3 which had the 3.89 in both OD and non OD cars... hence their good cruising ability.... and rare speedo gauge!
Thanks Michael .. Good to know! ... what's the difference with the speedo gauge in the S3?

... David
 
My dad used to comment about how Rootes did the different rear ends and speedos. As Michael said, you have to get a different speedo to match your rear end. Other cars would simply have a different speedo drive gear to swap.

Somewhere on this board are posts about what number is at the bottom of the speedo, and what rear end that goes with.

Of course, getting a correct one is going to be difficult. The three options are to (1) get a shop to rebuild your speedo for the correct rotations (which will only work if they have a stash of old speedo parts to change its gearing, (2) just have the shop re-magnetize your needle to be correct, but leave the odometer/tripmeter inaccurate, or (3) get a gear reduction adapter to put on the back of your speedo.

I did #1 25 years ago at West Valley Speedo (the "Mo" in MoMa Speedo - "Ma" was his wife and they divorced and she move and opened her own shop). But since then, something happened with the magnetism and the speed is now off.
 
Back
Top