• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Steering shaft for Alpine series 2

A

Alan11

Donation Time
Hi, I am looking for the steering shaft for my Sunbeam. The current one has worn out and cannot be used. Some of you might have come across my previous post that there is a lot of free play when I tried to steer my car. The workshop has found out the issue after it was dismantled. I understand that it is difficult to find steering shaft and would appreciate if someone can point me to a source that supply this part. Attached is the photo of the shaft for your reference. Below are my car model and chassis number for your information:

Vehicle model - Sunbeam Alpine Series 2 (right hand drive)
Chassis number - B9117857RR0

Looking forward to hearing from you.

Best
Alan
 

Attachments

  • Steering shaft.jpg
    Steering shaft.jpg
    1.6 MB · Views: 36
I have a shaft. The housing was busted. Will try to send pics this afternoon. It's yours if you pay shipping. I'm in Alabama, USA.
 
Alan, Here are some pictures. I think with a clean up you should be ok with this.

RPB
 

Attachments

  • 1000004904.jpg
    1000004904.jpg
    1.3 MB · Views: 16
  • 1000004905.jpg
    1000004905.jpg
    1.1 MB · Views: 17
  • 1000004906.jpg
    1000004906.jpg
    1.4 MB · Views: 15
  • 1000004907.jpg
    1000004907.jpg
    1.2 MB · Views: 15
  • 1000004908.jpg
    1000004908.jpg
    1.2 MB · Views: 16
Oops! never mind. I reread the original post just after I posted pics. This will not work. Sorry.

RPB
 
PawPaw said:
Alan, Here are some pictures. I think with a clean up you should be ok with this.

RPB
Click to expand...
Thank you Sir! I plan to arrange for it to be ground shipped to Florida and then my courier will ship to Singapore. May I know what is the estimated weight and dimensions for me to work out the charges?

My shipping address in Florida is:
4283 Express Lane
Suite SG7044
Sarasota
FL
34249

Can I DM you via FB? My FB account name is Alan Sng

Alan
 
Sorry Alan this is gor a LHD. Sorry to get your hopes up. Compare the land in the screw.
 
I do have one. I just checked it out and took pictures and video and posted it on my website. The only thing I found is the bearing race has some pitting on one side. Here's the link to the pictures. Sunbeam steering shaft
 
Thank you. Lemme show to my workshop to find whether it can be used. By the way, was it working fine previously?
 
Dear Sir

Today I have shown the pictures to my workshop and they advised that it will not be suitable because of its condition. I truly appreciate your offer (to help). Thank you very much.

Best
Alan
 
You must log in or register to reply here.
Back
Top