Series II - Wiper Arms

[1962300]

Working on my 1962....
I have 4 wiper arms.

2 are longer & match with their angle.
2 are shorter (& 1 shorter than the other) and have screws that retain wiper blades to the arms.

Can someone tell me what arms may be correct for the drivers & passenger sides.
Can someone tell me if wiper blades are readily available?

Thanks!

 

[1962300]

Would someone be so kind to measure each Wiper Arm that would be correct for a Series 2?
Maybe a picture too?
Thanks!

(PS - Do we know who sells new blades?)

 

[1962300]

Maybe this is where I get the refill blades & then try to determine which of the 4 arms I have fit the car....

https://www.napaonline.com/en/shop/replacement-parts/wipers-windshield/wiper-blades-refills/201579929

 

[1962300]

Hello -
Wondering if anyone can tell me which wiper arms may be correct for my Series II.
One pair I have (without blades) are identical in length & shape.
The other pair (with blades) are of different lengths and one has a bend at the end of the arm.
Thanks

 

[bernd_st]

This is how original wiper arms should look like (no screws, no different lengthes):

AUSTIN MORRIS MINOR DB4 DB5 IMP SUNBEAM MG WOLSELEY MINI JAGUAR TRICO WIPER ARMS | eBay UK

ASTON MARTIN DB4, DB5 1962-66. WOLSELEY 15/60, 16/60 1960-70. WOLSELEY 6/99, 6/110 1959-68. ASTON MARTIN DB4 1959-61. OUTSTANDING CONDITION GENUINE TRICO WITH 'MADE IN ENGLAND' STAMPED IN THE ARM. WOLSELEY HORNET 1962-69.

www.ebay.co.uk

 

[1962300]

Perfect! Thank you!

 

[1962300]

I have purchased new Wiper Blades for my factory Wiper Arms.

https://www.napaonline.com/en/p/WIP61233

They come with clips (item in the front left of the picture).
Those clips slide onto the end of the wiper arm.
But the clips are too narrow to properly slide onto the width of the Arms.

I don't wish to grind the arms to fit into the clips.
Any thoughts?

Thanks

 

[1962300]

Along with the above ask....
Anyone have recommendations on where to get blades that may attach to the arms seamlessly?
Or maybe I try to widen the above clips in order for it to slide onto the arm.
Thanks

 

[hartmandm]

The WW51 blades I purchased from Sunbeam Specialties fit fine on my Series V wiper arms.



Mike

 

[1962300]

The parts book reflects different part numbers for the Arms & Blades from Series I & II AND THEN Series III, IV & V.
But I shall call Sunbeam Specialties all the same.
Thanks!

 

[alpine_64]

The parts book reflects different part numbers for the Arms & Blades from Series I & II AND THEN Series III, IV & V.
But I shall call Sunbeam Specialties all the same.
Thanks!

Correct. The early series has a much more curved screen...the arms have a differnt crank angle and the clipping point and springing lengths are different to the series 3-V .. if you use generic parts they will not seat on the screen at the ends of the head and the curved parts of the screen at the end of the sweep won't be cleared