Series II - Brake Reservoir Mounting Items

[1962300]

Seeking the factory Clip & Bracket set up that holds the brake fluid reservoir for a Series II.
Also seeking advice where it all bolted onto the firewall; or where it mounted.
Thanks!

 

[Toyanvil]

This is how it mounts, it may be one of the only things left stock on my series 2. I looked, but I don't have an extra one. sorry

 

[Gary T]

Attached is a photo of the Series II engine compartment with the brake reservoir and bracket shown. There are two holes in the firewall that look like tubes that bolt the bracket to the firewall. If you have any questions let me know. I also have a bracket for sale for $30 plus shipping if you are interested.

 

[1962300]

Thank you both for the pictures!
I am using a later fluid reservoir (maybe a Series V), so I think the bracket you may have (Gary T) may not work for me.....
Maybe?
I am also checking with the gent who sold me the Reservoir to see if he has a bracket that will work for this Reservoir.
Thank you!

 

[bulldurham]

Think I may have what you need. Ill check tomorrow.

 

[sunalp]

Matt,
Sent you an email.

 

[PawPaw]

The only thing I can show is on my series 1. Here are two pics showing the reservoir and master cylinder. As you can see, the reservoir is
mounted on the driver side fender well. Hope this helps.

RPB

 

[bulldurham]

Have it if you need it.

 

[hartmandm]

Do you really need a bracket for mounting a series V reservoir?

 

[sunalp]

Do you really need a bracket for mounting a series V reservoir?

If you want to mount it to the firewall, you do.

 

[hartmandm]

It isn't clear which reservoir the OP has, though it sounds like it is not a series 2 reservoir. Posting a picture would clarify. Maybe it isn't even a series V reservoir.

 

[1962300]

It's this cute little reservoir that I need to mount remotely from the master, run the hard line in between, so that I can then use the drivers side Brace that lives from inner fender to firewall. I have a bracket on the way that should resolve this problem.
Thanks all!

 

[sunalp]

He has a series V reservoir. He needs it to mount to the firewall so he can mount
the firewall brace.

 

[hartmandm]

I'd guess that is a series IV master + reservoir given the reservoir is directly mounted to the master. The Alpine Parts Manual shows the series V had a different part number for the reservoir. Are the series IV and V reservoirs interchangeable in their mounting?

Thanks,
Mike

 

[sunalp]

Yes, they're basically the same.