SERIES engine parts

[bulldurham]

I tore down a Series II engine about 2 years ago to find out problem... #4 piston seized. I got a O/D unit from the car and it is being used after a rebuild.
All other parts except the crank is available for the taking, free, just pay shipping.
I will say the head is very re build able as there is probably enough for 2 re surfacings.
Engine # is B9118881, lrx- od. bunch of the smaller external parts available.
-cam, fuel pump w/ broken glass, 2 harmonic balancers, steel crank nut for hand crank, oil filter assembly, flywheel,bell housing w/ throwout arm, steel water pump,
timing chain tensioner,distributor [mechanical tach], 2 short ground cables, generator mounting bracket, dual Zenith hard line fuel connectors,,oil pump assembly, coilw/ brackets, complete e-brake assembly,oil pressure hard line, radiator pressure tank w/ thermo unit,tappet cover w/ down tube, engine block drain line, dip stick, set of dual Zeniths w/fuel line connectors.
Other stuff.. late series hood in good condition rust wise, set of series V pistons [ used ], used late series carpet kit,
located in central NC.

 

[Knightowl61]

I'll take the head & maybe other stuff. Didn't know you were dumping stuff.

 

[bulldurham]

Last call before dumping Series II parts. I understand shipping costs are out of sight but some of these parts are small.
Correction, the crank is available !

 

[Scotty]

Do you still have the manifold and Carbs/linkages/etc for it?

 

[Unbeam]

I'll take the block if I can pick it up in a couple weeks
David

 

[bulldurham]

That's ok, David. It will need a re bore for sure.
Thanks

 

[bulldurham]

smaller parts left include complete E brake assembly, cam, 2 crank pulleys, oil pressure hard line, clutch throw out arm w/ slave push rod, 2 short engine to body ground straps, tappet cover w/ down tube. Will have to check but may still have the engine to sump braces and clutch/brake pedal assemblies.
I'll be disposing of remaining next Friday, Oct 17.

 

[DaveSeries1]

Don't know if you still have it, but I can use the complete oil filter assembly if bolt, spacers, and spring are with it. I live in NC. Dave

 

[bulldurham]

Sorry, Dave but it is promised. If that should change I'll let you know.

 

[Scotty]

Thank you for the update!

Do you have pics of the Tappet cover with down tube? If it's still available, I might want it.

 

[DaveSeries1]

Sorry, Dave but it is promised. If that should change I'll let you know.

Thanks, I appreciate it. Dave

 

[bulldurham]

Still have the tappet cover. Dirty but in good condition.
Don't have much luck posting pictures but Ill try.