1. Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.


    Dismiss Notice

Sebring throttle linkage

Discussion in 'Rootes Racing' started by Limey, Oct 25, 2021.

  1. Limey

    Limey Gold Level Sponsor

    Hi All,

    I'm fitting a nice pair of period Webers and Jack Brabham 'Performance' manifold to my HA. I want to copy the neat linkage in this old photo. I believe it is of a Sebring Alpine? Has anyone got better shots of the linkage at the radiator end?



    Attached Files:

  2. jdoclogan

    jdoclogan Platinum Level Sponsor

    This is how I did the Promotional HLM's duel Weber linkage. I took the linkage bracket from rear down draft Zenith.


    Fabricated a new Weber linkage bracket with a cut and weld process. Such that I could use the two inner mount points for the Weber carburetors to the intake manifold for the linkage engine mount.
    The mount was fabricated to receive a level horizontal linkage rod and a rear mount was fabricated to be fastened at the fender brace mount to firewall bolts.
    Standard Weber (adjustable) vertical linkage was used to connect to the throttle pedal linkage and rear Weber connector.
    Last edited: Oct 26, 2021
  3. Limey

    Limey Gold Level Sponsor

    Many thanks for those pics. Plenty of food for thought. Alrthough I'm going to try to extend the throttle rod to the radiator end of the head.

Share This Page