• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Seat base hardware.

V

volvoguys

Diamond Level Sponsor
I'm looking for a few parts to finish the base of a Series V left (driver) side microcell seat. The parts I'm looking for are can be seen in the factory parts manual as 190 adjusting handle, 191 cap, 192 ratchet pawl, and 193 spring. I also seek a "return lever" which is on the other side of the base. A large spring attaches to it to create forward tension to lower the seat back into the base. It's hard to make out in the parts manual but is illustration 194 (seen on the lower left side of the right-side seat). These parts are all specific to the left seat. Plx PM, call or email if ya can help me out with some or all the bits. Thx, Mark
 

Attachments

  • SCN_0002.pdf
    991.6 KB · Views: 25
Last edited:
volvoguys said:
I'm looking for a few parts to finish the base of a Series V left (driver) side microcell seat. The parts I'm looking for are can be seen in the factory parts manual as 190 adjusting handle, 191 cap, 192 ratchet pawl, and 193 spring. I also seek a "return lever" which is on the other side of the base. A large spring attaches to it to create forward tension to lower the seat back into the base. It's hard to make out in the parts manual but is illustration 194 (seen on the lower left side of the right-side seat). These parts are all specific to the left seat. Plx PM, call or email if ya can help me out with some or all the bits. Thx, Mark
Click to expand...
Well, Sean Johnson was able to help me out with nearly all the bits except for one. I still need the left (driver) side seat adjustment handle as seen as illustration 190 below (the plastic cover - 191 - would be great, too).

Thx, Mark


1737460673379.png
 
volvoguys said:
I'm looking for a few parts to finish the base of a Series V left (driver) side microcell seat. The parts I'm looking for are can be seen in the factory parts manual as 190 adjusting handle, 191 cap, 192 ratchet pawl, and 193 spring. I also seek a "return lever" which is on the other side of the base. A large spring attaches to it to create forward tension to lower the seat back into the base. It's hard to make out in the parts manual but is illustration 194 (seen on the lower left side of the right-side seat). These parts are all specific to the left seat. Plx PM, call or email if ya can help me out with some or all the bits. Thx, Mark
Click to expand...
All seat base parts have now been sourced. Thanks to all who responded and/or helped.
 
You must log in or register to reply here.
Back
Top