• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Rear hub installation.

Jimjordan2

Jimjordan2

Donation Time
Ready to install my rear hubs. Everything on the rear end and axle assemblies have been installed back on the car. Differential, driveshaft, axles, backing plates, brakes. I just now need to put the hubs on. What's the best method of installation. Try to push it on using the main nut, or use a large socket and drive the hub on first?
Series V
 
DanR

DanR

Diamond Level Sponsor
Jim,

Might be a good idea to install new harden keys while the hubs are off. I simply place the hub on the axle and utilize the washer and nut to "fix" the hub in place, torqued to specs.
​
 
You must log in or register to reply here.
Top