DanR
Diamond Level Sponsor
For sale: Mount brackets, spacers nuts, bolts and washers for installation of Rear disc brakes for Alpine and Tiger.
The kit consist of:
2 each Brackets, axle housing flange to Caliper OEM Bracket; Spacers 1/4" thick 2 each; Spacers 1/8" 2 each; Spacers 1/16" 2 each; 2 each E-brake levers replacement for Saturn 1 right & 1 left.
6 bolts included ¼ - 20 x 1 ¼” lg w/nuts and washers,
for securing the bracket & spacers to the axle flange.
4 bolts 10 mm 1.5 x 25 12.9 for securing the kit bracket to the Saturn caliper bracket.
Wire wheel kits will be furnished with 6 each additional 1/4" spacers & longer bolts.
Sells for $155.00 + Shipping
NOTE: If you want rotors modified (4 bolt Sunbeam pattern drilled) as part of your kit, there is an additional cost of $100 to cover: modification to rotors, labor, and shipping (lower 48). If you decide to DIY, make sure you also get the Saturn OEM mount bracket because it is need for mounting to the KIT Axle Housing Bracket.
Below are the individual components recommended for converting a Sunbeam Alpine or Tiger rear drum brake system to a more modern Disc/Caliper/Rotor system. They are from a 1992 Saturn SC rear wheel setup and other interchangeable year/model components available. Nothing special about these components, just what my friend started with, they worked, so that is why the decision to continue.
The designed brackets and spacers will fit the bolt holes in the flange on the Stock rear axle housing. The brackets are interchangeable for either right or left sides.
I designed an emergency brake lever to replace the Saturn lever on the caliper so the Alpine hand brake will function correctly.
SATURN COMPONENTS RECOMMENDED consist of four items they are:
1. CARDONE 18B4524 and 18B4525 Remanufactured Unloaded Calipers w/Brackets Left and Right Rears with metal pistons. Estimated cost $60 each
2. CENTRIC 50007140 PQ PRO; w/Shims and Hardware. Premium Pads, Rear Disc Brakes. Estimate Cost $24 - $26. A set is for both sides.
3. CENTRIC 12062037 Rotor rear disc brakes. Estimate cost $20 each.
4. CENTRIC 15062355 Brake hose Estimate $8.46 each
NOTE: If you want rotors modified (4 bolt Sunbeam pattern drilled) as part of your kit, there is an additional cost of $100 to cover: modification to rotors, labor, and shipping (lower 48). If you decide to DIY, make sure you also get the Saturn OEM mount bracket because it is need for mounting to the KIT Axle Housing Bracket.
I NOW have fittings available for the Stock Steel wheel 13”application.
I want to ensure total safety and performance before offering. Let the Buyer beware..... I stand behind my laser cut brackets and spacers.
Direct your questions to tiger2dan@gmail.com
UPDATE as of today, AUGUST 3, 2023
The kit consist of:
2 each Brackets, axle housing flange to Caliper OEM Bracket; Spacers 1/4" thick 2 each; Spacers 1/8" 2 each; Spacers 1/16" 2 each; 2 each E-brake levers replacement for Saturn 1 right & 1 left.
6 bolts included ¼ - 20 x 1 ¼” lg w/nuts and washers,
for securing the bracket & spacers to the axle flange.
4 bolts 10 mm 1.5 x 25 12.9 for securing the kit bracket to the Saturn caliper bracket.
Wire wheel kits will be furnished with 6 each additional 1/4" spacers & longer bolts.
Sells for $155.00 + Shipping
NOTE: If you want rotors modified (4 bolt Sunbeam pattern drilled) as part of your kit, there is an additional cost of $100 to cover: modification to rotors, labor, and shipping (lower 48). If you decide to DIY, make sure you also get the Saturn OEM mount bracket because it is need for mounting to the KIT Axle Housing Bracket.
Below are the individual components recommended for converting a Sunbeam Alpine or Tiger rear drum brake system to a more modern Disc/Caliper/Rotor system. They are from a 1992 Saturn SC rear wheel setup and other interchangeable year/model components available. Nothing special about these components, just what my friend started with, they worked, so that is why the decision to continue.
The designed brackets and spacers will fit the bolt holes in the flange on the Stock rear axle housing. The brackets are interchangeable for either right or left sides.
I designed an emergency brake lever to replace the Saturn lever on the caliper so the Alpine hand brake will function correctly.
SATURN COMPONENTS RECOMMENDED consist of four items they are:
1. CARDONE 18B4524 and 18B4525 Remanufactured Unloaded Calipers w/Brackets Left and Right Rears with metal pistons. Estimated cost $60 each
2. CENTRIC 50007140 PQ PRO; w/Shims and Hardware. Premium Pads, Rear Disc Brakes. Estimate Cost $24 - $26. A set is for both sides.
3. CENTRIC 12062037 Rotor rear disc brakes. Estimate cost $20 each.
4. CENTRIC 15062355 Brake hose Estimate $8.46 each
NOTE: If you want rotors modified (4 bolt Sunbeam pattern drilled) as part of your kit, there is an additional cost of $100 to cover: modification to rotors, labor, and shipping (lower 48). If you decide to DIY, make sure you also get the Saturn OEM mount bracket because it is need for mounting to the KIT Axle Housing Bracket.
I NOW have fittings available for the Stock Steel wheel 13”application.
I want to ensure total safety and performance before offering. Let the Buyer beware..... I stand behind my laser cut brackets and spacers.
Direct your questions to tiger2dan@gmail.com
UPDATE as of today, AUGUST 3, 2023
Attachments
Last edited: