In need of true weber carb

[dlivi]

Looking to replace the knock off weber 38 that is on my car for a real one.
open to what you may have that needs to be rebuilt but in good condition made in Italy perhaps?
Thanks
Devin

 

[jdoclogan]

Are you wanting single downdraft or duel side drafts?

 

[dlivi]

single downdraft like weber 38/38 or 36/32 as that is what I know my manifold will work with

 

[jdoclogan]

For my Series III Alpine with a single solex intake. I used the 38 downdraft DGES, meant for the Jeep applications, from Redline years ago. http://www.redlineweber.com/carb-kits/auto/jeep/ I ported the intake inlets to 38mm and adjusted the gasket to fit.

 

[jdoclogan]

Or Pierce Manifolds has the DGMS https://www.piercemanifolds.com/WEBER_38_38_MANUAL_CHOKE_CARBURETOR_p/18930.086.htm

 

[alpine_64]

If you get the DGAS its a sync carb.. Both throats open at the same time.. Not a progressive carb.. Little heavier on fuel.. But much snappier.

The 38/38 DGAS is like having 2 x 38 Zenith carbs without the balancing issues.

 

[twautomotive]

Would you be interested in this Weber? See gallery parts folder for pictures. $75 plus shipping. Tom