Trying to get my 1965 Beam back on the road after letting it sit for many years. It ran just fine before putting her in the barn.
I did the usual procedures prior to startup and bought a new battery. At first the switch DID turn the motor over. Then the switch would not activate the starter.
The starter relay had gone bad and was replaced, checked the fuses, examined the wires under dash (no melted or burned).
Used a remote starter switch, and it turns over fine.... but won't using the ignition switch.
Thanks for any suggestions.
I did the usual procedures prior to startup and bought a new battery. At first the switch DID turn the motor over. Then the switch would not activate the starter.
The starter relay had gone bad and was replaced, checked the fuses, examined the wires under dash (no melted or burned).
Used a remote starter switch, and it turns over fine.... but won't using the ignition switch.
Thanks for any suggestions.