• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Delta KC cam

twospeed

Donation Time
I read some where that the valve cleance for the Delta KC grind cam is .014in .014 exhaust,is that true?
I have been running mine at .012--.014
 

Derek

Donation Time
I have this and had it tested by Delta when I rebuilt my motor. I am running as per the WSM but I note on my spec sheet from Delta they ran the tests at .012 for both. Not much clarity here I qam afraid, but ther it is. I'm sure Delta did not run a hot test either. I have no issues with the stock spec.

Derek
 
Top