• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Can't find letters, side scripts and hood badge holes

Sunbeam-Chile

Bronze Level Sponsor
Hello, blessings to everyone.
My Series II is currently being touched up and is due for a full respray. Now that I’m down to the bare metal, I can’t find the mounting holes for the front and rear "SUNBEAM" lettering, the hood emblem, or the side "Alpine" badges. Is there a guide available for drilling these holes? I searched the forum and found some old threads. Also, what is the recommended mounting method? I found some plastic clips for a Mini at a local shop... https://miniparts.cl/producto/clip-seguro-insignia/
I bought two to try out, but it seems the center is larger and the letters fit loosely.
Any suggestions or comments would be appreciated. Thanks.
 
Hello, blessings to everyone.
My Series II is currently being touched up and is due for a full respray. Now that I’m down to the bare metal, I can’t find the mounting holes for the front and rear "SUNBEAM" lettering, the hood emblem, or the side "Alpine" badges. Is there a guide available for drilling these holes? I searched the forum and found some old threads. Also, what is the recommended mounting method? I found some plastic clips for a Mini at a local shop... https://miniparts.cl/producto/clip-seguro-insignia/
I bought two to try out, but it seems the center is larger and the letters fit loosely.
Any suggestions or comments would be appreciated. Thanks.
The letters are held on with a small flat type pinch nut and the side scripts are held on with a "metal" barrel clip insert. Sunbeam Specialties has them I believe. I know shipping is an issue. Maybe someone else on the forum has an idea.

.... David
 

Attachments

  • Sunbeam scripts and clips.jpeg
    Sunbeam scripts and clips.jpeg
    484.8 KB · Views: 5
Last edited:
What a great video! .. no chance of a drill bit getting away from you with this method. Thanks Tim ... and of course you to Don for bringing it to our attention.

..... David
 
As others have mentioned they were held kn by clips and all letters and badges are available frkm the suplliers .. you can cut the mounting studs and use tape.

@Sunbeam-Chile you say its bare metal and you cant see the holes? I would assuje yoh can see either weld marks or filler from the back of the panels
 
Hi Michael, there is solder (estaño) in the relevant areas, so I didn't want to dig any deeper. I'll try using tape to attach the letters... you're right, actually—it's not worth drilling holes... Thanks everyone, regards, Pablo.
 
Back
Top