-
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
Brake Rotors
- Thread starter belmateo
- Start date
Barry
Diamond Level Sponsor
Correct, the rotor diameters were 9.5" for S-I & S-II Alpines and 9.85" for S-3, S-IV and S-V Alpines.
In the "I wonder how that happened" category:
WSM-124 / General Data / Page 23 correctly lists the front disc diameter as 9.5" for S-I & S-II Alpines and 9.85" for S-3 Alpines, but does not show the front disc diameter for S-IV Alpines.
WSM-145 / General Data / Page 24 incorrectly shows "Front brakes-diameter" as 10.3" and makes no mention of which models are included. FWIW, it is not possible to use a brake rotor with a diameter greater than 9.85" in combination with the factory S-IV / V calipers and the factory S-IV / V front suspension uprights (aka, spindles).
