1. Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

    Dismiss Notice

Body Number

Discussion in '"Stock" Alpine' started by Ashfried, Apr 4, 2018.

  1. Ashfried

    Ashfried Silver Level Sponsor

    On a 66 series V, where would the body number be?
     
  2. Barry

    Barry Platinum Level Sponsor

    The chassis number (aka VIN number) on a S-V is stamped on a data plate mounted near the hood latch panel.
     
  3. Ashfried

    Ashfried Silver Level Sponsor

    On the registry they ask for the engine # on the engine block & Chassis, which is the data plate,
    but also the body # which seems to be 6 numbers starting with a "6".
     
  4. Barry

    Barry Platinum Level Sponsor

    Same general area, stamped on a separate tag that is about 1/2" x 3".
     
  5. Ashfried

    Ashfried Silver Level Sponsor

    Thanks Barry
     
  6. DanR

    DanR Diamond Level Sponsor

    Ash, The Body No "field" in the Registry is actually the SAL number. Your ALpine will or should have a SAL on "a seperate plate", Next the Data Plate if I am correct.

    NOTE: (I edited this POST to correct an error I made in wording).
     
    Last edited: Apr 5, 2018
  7. Barry

    Barry Platinum Level Sponsor

    On my S-V, the body / SAL number is NOT on the Data Plate; as previously posted, it is stamped on a separate tag that is about 1/2" x 3".
     
  8. DanR

    DanR Diamond Level Sponsor

    I miss worded in the prior post. Should have "next to" not "on" the data plate
     
  9. 65beam

    65beam Donation Time

    If you look close at this photo you'll see the body tag number or SAL tag mounted with two small screws on the flat part under the hood. There is info in the tech section on this forum that gives detailed info concerning the tags. 107_1011.JPG
     

Share This Page