• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

1959 Rapier Brake Master Cylinder

C

Chrisp Rapier

Donation Time
I have a rebuild kit and I am unclear on what parts I have here. Is the part second from left, the spring retainer or the check valve? In any event it would appear that either, the spring retainer or the check valve is not a part included in the kit.
 

Attachments

  • Untitled.png
    Untitled.png
    674.3 KB · Views: 6
The item 2nd from left is the check valve. It appears the spring retainer is not included. From Work Shop Manual.

The spring retainer is a 3 legged cup that fits in the small end of the spring and rests against the inside of the main seal.
 
Filister said:
The item 2nd from left is the check valve. It appears the spring retainer is not included. From Work Shop Manual.

The spring retainer is a 3 legged cup that fits in the small end of the spring and rests against the inside of the main seal.
Click to expand...
Thank you for that. I figured that part was the check valve but I blew into it in both directions and the air flows through the same either way. I guess it is just a restricted orifice.
 
You must log in or register to reply here.
Back
Top