• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

v6 conversion

  1. DanR

    2.8 V6 FORD Engine Rebuild Available

    I have several engines available that are rebuildable. I have a machine shop near me that has built lots of them for me and others. They will all have the correct timing covers, Bellhousing and flywheels. I will have them built with all new parts, they will be balanced, the heads will all...
  2. Slainte

    v6_jose contact info

    Jose has asked me to post his contact information. Apparently, a number of members have tried to get in touch with him through obsolete accounts. Anyway, you can email him at v6_jose@ yahoo.com.
  3. DanR

    Early Series IV GT BW35 ?

    In all the years I've owned my B9400766 SIV GT BW35 it came to me this morning while doing some welding to the Dual Exhaust "pass-thru" the X frame member, the mounts that are affixed to the body/frame for the transmission mount bracket sits about four (4) inches more to the rear (closer to the...
  4. DanR

    Fixing a Harmonic Balancer Bearing surface

    For those of you that have a bearing surface worn or damaged like on the Harmonic Balancer for a '74 - '78 Mustang II, here is a quick fix by utilizing a NATIONAL Part Number 99166. 1st PIC shows the balancer and it has a small grove showing some wear from the oil seal. 2nd PIC is the National...
  5. DanR

    Canadian Rootes Report

    DanR, Ron Stein did a feature on my Sunbeam V6 engine swap in the Canadian Rootes Report. Mentioned you as well! Thanks for all your help! Doug P>S> Here's the latest News Letter...
  6. DanR

    ARI Master Brake Cylinder 83-16401

    Here are a few PIC's of a master brake cylinder I have that looks as if it will "fit" the Alpine with the V6 and give adequate clearance. However I know nothing about it other than it is new in the box. Guess it came in my possession thru some trade I have forgotten:) ANyone know anything as...
  7. wile coyote

    How I did the v6 swap

    I used this site every step of the way and the help and history of posts has been invaluable. Thank you everyone for taking the time to respond. I thought I would document in one place how I did my swap, and maybe it will help someone along the way. In no way do I imply this is the only or...
  8. Jondjohn

    Wanted: Sunbeam Alpine Series III

    Wanted: Sunbeam Alpine Series III - I’m interested in buying a Series III Alpine, must be very solid rust free, no major previous damage, prefer a professionally converted V8 or V6 car but original is ok too. Thanks! JD Call or text: 601-624-7288 or Email: jd@jdjohnsonrealty.com
  9. Rockonp04

    EFI Conversion/Intake Question

    My Dad and I are in the midst of a V6 conversion. We are currently researching EFI for the V6 2.8l. We are leaning toward the 2 barrel Holley Sniper EFI. This 2 barrel is more than plenty for the V6 since the hp range is good up to 350 hp which is more than plenty with our engine. My question...
  10. Radiator Modification for 2.8 V6

    Radiator Modification for 2.8 V6

    Pictured are two Ofy 4 bbl water outlets. I modified the water neck turned to the left. Recent discovery of a Gates 21341 Hose helps either water neck work for the left hand radiator hose connection I recommend.
  11. Components for Converting FORD Cologne 2.8 V6 in Alpines

    Components for Converting FORD Cologne 2.8 V6 in Alpines

    Comparing Slave cylinder brackets. DanR's is designed to sit farther away from the heat produced by the Headers. Hopefuly for a longer life.
Back
Top