• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Search results

  1. boss-tiger

    Early Alpine hardtop gutter trim

    Have a nice pair of early hardtop gutter trim - make me an offer (no clue re. value - any input appreciated).
  2. boss-tiger

    Have a few more heater control bezels $150

    $150 refurbished heater dash control bezel includes shipping up to $15. I finished and have 4 more available (3/12/24). I guarantee that no good cores were harmed. Stripped to bare metal, check stud threads, sanded, primed, 3+ topcoats satin black, 2500g wet sand, lettered, 2+ topcoats...
  3. boss-tiger

    SOLD 1966 Sunbeam Tiger shell + parts for sale Denver CO

    11/03/2023 Listing $3,700 located in Denver Colorado 1966 Sunbeam Tiger shell & parts bill of sale only, has JAL, correct # matching locks, TAC'ed Orig. build info: 1966 Tiger B382001191 LRXFE JAL: 661179 Paint: 39 Carnival Red keys: RM908/FS953 TAC inspection # 1285 This is a major project...
  4. boss-tiger

    Wiper motor ID and wiring question

    Putting wiring back in 65 Mk1 car. ? re. my wiper moter. - wondering if it is a single vs. 2 speed motor. Hoping to wire it up correctly and trying not to damage by wiring incorrectly. It does have 3 wires making me think that it could be a 2 speed. Any ID input or reference information would be...
  5. boss-tiger

    Looking for older style 15" Panasport 'Formula One' wheels with correct offset for Tiger

    Believe the Panasport 'Formula One' wheels were made in the 80's and 90's. Hoping to find a set of 4, maybe a long shot, or .. maybe time someone is thinking of a wheel upgrade? Much appreciated ...
  6. boss-tiger

    Found one .. need a RIGHT soft top vertical finisher panel

    I need a RIGHT soft top vertical finisher panel, perfect world would like to get two. FYI, I have three left's - what are the odds of that ? Picture shown is a left, NOT what I need but figured it could not hurt to include
  7. boss-tiger

    Found one .. wanted steering column bearing assembly or large outer race cup

    Anyone have a good, spare steering column bearing assembly (bearing at steering wheel usually survive best is seems) - front/engine outside bearing cup on mine is cracked in mult. spots. Probably a prev. owner error during removal or a front end impact of some kind. I know Rick at Sunbeam...
  8. boss-tiger

    Found one .. Need a rear axle for Tiger

    I see I am 2nd in the search for an axle currently, looking for stock Tiger axle
  9. boss-tiger

    Found one .. Need Tiger left frame motor mount hanger

    Hope someone may have a spare Tiger left frame motor mount hanger - thanks
  10. boss-tiger

    Wanted : Pr. convertible bow latches in very good condition

    Hoping to find a pr. of convertible latches in very good condtion. Have seen the repo's and hoping to find a good original pr if possible. Also, anyone out there able to restore original clamps - take apart, have chromed then put back together. FYI, I could not get the pin to punch out so...
  11. boss-tiger

    Wanted : Convertible frame right side finisher panel

    Need RIGHT side convertible finisher panel. Turns out I have (2) left side panels - what are the odds
  12. boss-tiger

    Pair new bullet side mirrors $90 .. SOLD

    New in box, pair of classic GT bullet exterior mirrors, $90.
  13. boss-tiger

    Need 4 lower seat back finisher plates and 2 larger seat bottom end panels

    These are the smaller plates that fit on bottom corners of the seat backs - also could use a pr of the larger seat botom end panels
  14. boss-tiger

    Need Left early style seat release lever and info

    I am looking for a left early style seat release lever. Also hope someone may know what and when these levers were used.
  15. boss-tiger

    SOLD the 3 made, hope to make more soon $150 Refurbished Heater Dash Control Bezels

    $150 refurbished heater dash control bezels, currently only have 3 available. Started with an original past it’s prime but in good physical condition core which obviously had lived a long, rough but awesome lifestyle. I guarantee that no good cores were harmed. Stripped to bare metal, check stud...
  16. boss-tiger

    Hardtop parts wanted: front headliner metal trim and 1/4 windows frame hinge piece

    Missing two late model hard top parts: horizontal metal piece that holds front of headliner to hardtop. Also missing a front vertical w/hinge 1/4 window frame piece (I have the other two 1/4 window frame pieces).
  17. boss-tiger

    Nice older repo solid walnut dash - refinished with poly & lettered $300 obo

    This is an older solid walnut repo dashboard - very nice grain and refinished with lettering. Turned out pretty well IMO. Carefully stripped, refinished, lettering, polyurethane top coat. My guess 15+ top coats carefully applied and multiple block wet sanding starting at 400 grit, then 1500 to...
  18. boss-tiger

    Pr of restored Alpine or Tiger gas tanks - $375

    Restored pair fo gas tanks (hot tanked, muriatic acid cleaned, evaporust, nutralized, acetone rinsed, coated inside with Red-Kote, spray primed & painted outside). These tanks did not leak or need any tank pin hole repairs (no solder, epoxy, etc.).. Have a longer gas tank resto back story on...
  19. boss-tiger

    Left gas tank - modified with SW fuel tank sending unit $175

    Restored left gas tank, very good condition, inside looked like new before coating (hot tanked, muriatic acid cleaned, coated inside with Red-Kote, spray painted outside). Has been modified with Stewart Warner gas tank sending unit (included). I restored with original tanks because this...
Top