• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Search results

  1. Jim in PA

    '66 Alpine parts to sell

    Well...maybe they already have their own that went with the car and these are for you or someone else?
  2. Jim in PA

    '66 Alpine parts to sell

    I have several parts left over from my Alpine I sold a few years ago. I'd like to see them go to a good home. Lets talk about what you want and offers.
  3. Jim's SV project

    Jim's SV project

    Still lots of little engine and driveline adjustments to do over the winter 09/10. Interior detailing and steering wheel rebuild...
    • Jim in PA
    • Media item
    • Comments: 0
    • Category: Series V
  4. Jim's SV project

    Jim's SV project

    Carbs to sync. Valves to adjust. Elect. ign. to install. Timing to adjust...lots to tinker with...
    • Jim in PA
    • Media item
    • Comments: 0
    • Category: Series V
  5. Jim's SV project

    Jim's SV project

    Still driving it on sunny days. I drove it 12-29-09 with the top down in 28F sunny weather and it ran perfectly. What a blast!
    • Jim in PA
    • Media item
    • Comments: 0
    • Category: Series V
  6. Jim's SV project

    Jim's SV project

    Now running and being sorted. Very fun to drive...
    • Jim in PA
    • Media item
    • Comments: 0
    • Category: Series V
  7. Jim's SV project

    Jim's SV project

    The body will have to wait...running gear is being sorted.
    • Jim in PA
    • Media item
    • Comments: 0
    • Category: Series V
  8. Jim in PA

    steering wheel hub?

    Mazda RX-7 stering wheel I bought a steering wheel from a Mazda RX-7 and it fit perfectly. Slight modification but it worked very well. I had, also, bought an aftermarket steering wheel and a hub to fit a Mazda RX-7 but never used them... it seemed to fit as I tried to see if it would work. I...
  9. Jim in PA

    Carb synch tool

    I used the method Kevin describes and it worked well.. I adjusted my valves first, set the dwell/ point gap then timing then carb balance then Colortune to get the correct color of combustion flame. Now that I type this I realize that it is time to redo these items...at least check and adjust as...
  10. Jim in PA

    Procomp cooling fans

    Radiator cooling fan A lot of folks have used Honda Civic cooling fans. Some use a manual control/ power switch, others use a combination of manual (override) control switch and thermostatic controller for the fan. The link you show has the whole package with mounting and thermostatic...
  11. Jim in PA

    One lucky NASCAR photographer

    unattended camera Yeah. Saw the other break and pull out of the groove. It is typical when a racer breaks, that they pull to the side of the track as to not drop fluids onto the track in "the groove". Cleanup can be a real pain and cause long delays. The young lady took her car home in a basket...
  12. Jim in PA

    Too cute!

    It was such a nice day today I drove my Alpine, Rusty, out to get a sandwich at lunchtime. I pulled along-side an SUV in the parking lot. In the rear driverside window was the cutest little girl, all of 4 years old. "That sure is a cool car you have" she said. "Thank you very much" I replied...
  13. Jim in PA

    Cigarette lighter

    Cigar lighter A couple of years ago I bought a "Cigar" lighter, as they are called on British vehicles, on eBay. There was a thread here discussing where and what to look for. I looked on UK eBay and found the exact type listed for a Jaguar car from the 60's or early 70's. The one I found is...
  14. Jim in PA

    S5 correct jackstand handle

    The jack that came with my SV has a nut at the top that is the same size as the lug nuts on the wheels. The idea is to use the lug wrench to raise and lower the jack. I have not seen anything for the engine starting crank handle to be used with the jack. I believe the SV did not come with engine...
  15. Jim in PA

    stiffeners ?

    I have an extra set of the stiffeners/ struts if you can't find yourself a pair on eBay or wherever... PM me if interested. Jim
  16. Jim in PA

    Running hot / no heater core

    radiator re-core I've had my SV since April 2008. 110,000 mi. on the clock and unknown if the engine was rebuilt at any time before I bought it. It is a tired old beast but it starts right up and runs well. Beacuse of the unknown state of the whole car and temp gauge readings well above 90C in...
  17. Jim in PA

    Silicone rocker cover gaskets

    Silicone rocker cover gasket These gaskets appear to be made with red silicone RTV using a mold. Kind of "home made" looking but still looks good. I'll report back on fit and function once I get some stick time with the gasket.
  18. Jim in PA

    SV Electrical Issues

    electrical Be sure all connectors are clean and tight. I had similar issues with brake lights and it was due to a loose spade connection at the double connector tail light. Scuff the connections with Scotchbrite if you can or even a slip or rolled tube of fine sandpaper. Use pliers to gently...
  19. Jim in PA

    Brake drums

    It is always good to keep an eye on eBay for Alpine parts. Used brake drums are there frequently but who knows the condition. Most decent service shops could spin your original drums on a lathe or grinder to true and smooth the friction surface for many more years of service. I had my drums...
  20. Jim in PA

    Zdp

    Zddp Lucas Oil has a ZDDP product readily available. I've used it the last few oil changes and my SV still starts and runs...
Top