• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Recent content by Dan Moore

  1. D

    Fitting a Tiger front crossmember

    Answer is yes I put 1 in mine 40 yrs ago you will need the steering linkage and steering wheel to but you will have to deal with the Tiger issues Dan
  2. D

    Difference between an Alpine and a Tiger in the Engine Compartment

    Hi Brian From what I,ve seen of your work in the past. If there is a will there is a way good luck on your plans Dan
  3. D

    Sunbeam Radio jingle...

    Thank you Kevin puff4 I will look it up
  4. D

    Sunbeam Radio jingle...

    Thanks nice tune But my bad it was Go Little Tiger by the Dragsters I can,t fined it anywhere
  5. D

    Sunbeam Radio jingle...

    Very cool has anyone got a recording of Go Little Tiger I think by the Daytona,s Dan
  6. D

    Installing a BW35 automatic in a series III

    Are these trans hard to find I think I know where there is one Dan
  7. D

    Happy Birthday V6 Jose

    Happy Birthday Joe
  8. D

    The Journey Begins - Series I V6 Restomod

    I put mine behind the kick panel on the drivers side there is a cubby hole there then ran all the wires up to the panel By the way electrician here don,t worry you guys got this and remember you can always get an electrician to check it :) Dan
  9. D

    I Love a Parade

    Hey Warren, is this what your talking about? BTW, your Scotty/Star Trek Meme, lived in my hometown (high school and joined the first hassars here for WWII)
  10. D

    What do you rate this hood from 0 (Ugly) to 10 (Great)?

    Must admit I don,t like the side vent either but it looks ok to me if painted I give it a 7
  11. D

    Lot of parts

    Off topic but I have to ask is that valve cover in the pic a mopar hemi or a ford sohc
  12. D

    Excitement Builds

    Hi Dan Well yes and no the spline count on the T5 fit the mustang II disc I think it is 10 as apposed too 23 spline for the ranger and it was a larger as you say 9" and I already had the webber clutch
  13. D

    Excitement Builds

    Hi Reg In my experience that the bell housing from a 85 Ranger will not except a t5 unless. I had to make a adapter plate out of 1/2 plate ad have it machined to fit the bell and the T5 but it will work with the hydraulic slave it does on my car But I still used the flywheel from a mustang II...
  14. D

    Electric Water Pump

    No Mike I did grind a little on the bottom of the manifold so it would not touch the front timing cover and only in that area I did take a piece of aluminum 1/2 thick then I drilled it for the 3 hole manifold and counter sunk 3 allen head bolts then drilled it for the 2 hole thermostat put...
  15. D

    Electric Water Pump

    Dan Originally I used the pan from the Mustang II that is 1 of the reasons The other reason was the motor mounts and there is lots of room for the dizzy . Mike 1 of the hoses is the by pass that goes to the original lower thermostat housing the other goes to the top right hand side of the...
See more
Top