-
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
alpine_64's latest activity
-
alpine_64 replied to the thread Unknown camshaft.There are too many variables in your question. If you have a holiday camshaft the holbay motor had a different distributor and... -
alpine_64 replied to the thread "Weekend Racer" Alpine Back running!.Good luck dan.. hopefully with ignition sorted and webers optimised you'll have a better run without the top end restrictions of the...
-
alpine_64 replied to the thread Series V Soft Top Vinyl Choices.I believe it's available from SS... Not sure what code. But shok specify everflex material
-
alpine_64 replied to the thread Series V Soft Top Vinyl Choices.I'm going to guess the trimmer secured it behind the side strips.... I had the best trimmer in Australia fit a top on my SII in 1997. I...
-
alpine_64 replied to the thread Series V Soft Top Vinyl Choices.If you want original you can buy a correct everflex top with the correct light grey interior. They make the interior feel much brighter...
-
alpine_64 replied to the thread Oil Pressure Relief Valve Mods.Believe so.. the rootes oprv design in general didn't seem to be great for longevity. I had 2 of the early ones stick
-
alpine_64 replied to the thread Oil Pressure Relief Valve Mods.Toms was adjustable, but the update in Dan's is the ball which should stop the galling of the moving component and allow pressure adjustment
-
alpine_64 replied to the thread Oil Pressure Relief Valve Mods.Steve Silverstein and Jarrod Gross both loomed into a ball OPRV many moons ago .. iirc some were made .. maybe touch base with JG and...
-
alpine_64 replied to the thread Hard Top Side Window Buttons.Kevin I had a bunch made.. large and small and the rubbers just before COVID. Bob who made them passed away .. but I still have them. I...
-
alpine_64 replied to the thread Carb advice needed.Can't see the head in the photo but wonder if it's an iron head arrow motor.... Or . If it is an alloy head is the manifold from a arrow...
-
alpine_64 replied to the thread Parrish top seals.Check @Bill Blue posts on those seals from a few years back
-
alpine_64 replied to the thread Shift Boot.Brent there should be a recess in the base of the boot that goes over the edge of the hole in the metal shift cover that secures it...
-
alpine_64 replied to the thread WANTED: Quarter Light base/finisher for GT interior left side.Just to widen the search . The GT 1/4 base is the same on all Series 3, IV, V GT and on tiger mkia and mkii ;)
-
alpine_64 replied to the thread Car Show Display Panel.The ones in the photos were the generic ones with factory spec and production numbers etc and printed to A2. they were also done in A4...